How to use Termination Station?Updated 2 years ago
How to Use
- Take off the top cover of the device and take out the power cord and bulb.
- Take the end of the power cord with a bulb socket and unscrew the bulb socket fastener.
- Insert the bulb socket into the middle slot of the top cover. Screw the fastener back in to secure the socket into position before putting in the provided bulb.
- Next, remove the safety film of the adhesive disc. This is located at the bottom cover of the device.
- Securely replace the top cover and plug it into a compatible outlet to TURN ON.
Tips for Proper Installation
- Make sure to position the Termination Station on a flat surface in areas with pest activity.
- For best results, place the Termination Station in an unobstructed location to allow for insects to detect the light easily.
- Whenever the Termination Station sticky pad becomes full, toss it in the trash, and immediately replace it with a new one.
Note: Adult fleas and mosquitoes sense heat (from bodies of pets, etc). Our device attracts these pests by heat, luring them out of upholstery, carpeting, and cracks. They then get stuck in the sticky trap and are rendered immobile.
Safety Warnings
Proper basic precautions should be taken when using this device. Mishandling or misuse of the device may cause property or personal damage.
- Turn off the device when not in use.
- Keep away from water and other liquid.
- Do not cover the device while in use.
- Replace the adhesive board once filled.
- Keep away from pets and children.
- This device is for indoor use only.